RP230
RP230 is an excellent choice to meet the unique rear projection needs of special events, attractions, and Pro AV applications.
RP230 is a flexible, translucent vinyl which is used in installations where a soft rear projection screen is required. Neutral grey in colour, the surface offers high transmission and low reflectance values for optimal viewing. With built-in diffusion to overcome hot-spotting, it gives excellent colour rendition, contrast, and a wide viewing angle.
Our proprietary and unique seam welding process ensures our screens have no visible seams under projection conditions. The surface may be folded for transport and storage, and can be cleaned with mild soap and water.
- Events
- Control centres
- Conference rooms
- Theme park rides
| RP230 | |
| Material | PVC |
| Colour | Mid-grey |
| Weight | 0.43 kg/m2 (0.09 lb/ft2) |
| Thickness | 0.3mm |
| Roll width | 3m |
| Made up screens | Available |
| Packing method | folded |
| Fire classification | UK |
- Web and eye (grommet). Triple fold web integral with surface
- Preformed pipe pocket any size on any side
- Cloth web and fixings (snaps) for press stud frames (UK only)
- Straight sides or shaped to special order
- Cut square (unfinished edge)
Screens should normally be transported and stored at temperatures between 5°C and 30°C (40°F and 85°F), with relative humidity less than 80%.
If screens are very cold (e.g. following air transport) then they must be allowed to warm up before unpacking, otherwise cold cracking may occur. Screens should be installed within a maximum of 2 months of shipping. Packages should be handled with care to avoid damage.
The general environment where the screen is installed should be kept reasonably clean to avoid dirt and dust build-up. Screens can be periodically cleaned using a soft brush or cloth, doing this vertically with limited pressure. Screens can be cleaned using a damp cloth wetted with water and a mild detergent. Under no circumstances should screens be cleaned with abrasive materials or harsh chemicals such as acids, bleaches or solvents. Harkness Screens is not liable for damage caused to screens through the use of inappropriate cleaning methods or chemicals.
For information on Installation, please see the Resources section of our website.
